| »
Portable (Personal) Detectors |
| |
100 DAY DISPOSABLE
GAS ALARM
A practical, maintenance-free, cost-effective solution
to short-term work projects, the GasAlert100
provides 100 days of continuous operation from the
day of activation. Available for H2S
& Co.
• Compact and lightweight (1 oz./30 g)
• Continuous, alphanumeric LCD
• Wide-angled visual alaram bar
• Zero-maintenance: no calibration, no sensor
replacement, no battery replacement/charging
• Two alarm levels: lown and high
|
|
| |
| GAS
PROBE CO-CARBON MONOXIDE METER |
Accurate, compact and lightweight, the GasProbe
Co provides fast, accurate sampling of
CO concentrations from 0 to 1,000 parts per million.
• LCD backlight
• Automatic sensor zeroing and self-test sequence
upon startup
• Automatic power-off after 20 minutes
• Easy-to-replace 9 VCD battery (battery life
500 hours) |
| |
|
|
|
| GAS
ALERT CLIP EXTREME (2 YEAR DETECTOR )
|
The GasAlertClip Extreme
provides two years of continuous, maintenance-free
protection from the day of activation. Ideal for
high-moisture environments, the GasAlertClip Extreme
is water-resistant and rugged enough to weather
the most severe environmental conditions. Available
for H2S, CO, O2 & SO2.
• Compact and lightweight (1 oz./30
g)
• Continuous, alphanumeric LCD
• Wide-angled visual alaram bar
• Zero-maintenance: no calibration, no sensor
replacement, no battery replacement/charging
• Two alarm levels: lown and high |
|
|
| GAS
ALERTEXTREME (H2S, CO, O2,
SO2, PH3, CI2,
NH3, NO2, HCN, ETO, CIO2,
O3, NO) |
Conditions in the field can be anything but predictable
and can range from scorching heat and blowing dust
to bitter cold and freezing rain. That's why this
detector was specifically designed to weather the
most severe environmental conditions.
GasAlert Extreme Performance
• Expanded list
of gases: H2S, CO,
O2, SO2, PH3, CI2,
NH3, NO2, HCN, ETO, CIO2,
O3, or NO
• Highly water-resistant (IP 66 /67)
• Tough and rugged
design with integral concussion-proof boot
• Datalogging
option available
• Standard vibrating
alarm (along with visual and audible alarms)
• Multiple language
options
• Compact and
lightweight |
|
|
| GAS
ALERT LEL COMBUSTIBLE GAS DETECTOR |
GasAlert
LEL is the smallest combustible (0-100%
LEL) gas detector on the market (4.6 oz. / 131 g).
Advanced catalytic poison protection extends the
sensor's life.
• 12 hours operation on rechargeable lithium
ion battery
• User field options include latching high
alarm, pass code protection and confidence beep.
• Backlight-low light (auto), alarm conditions
(auto)
• Peak exposures displayed on demand.
• Full function self-test
• Available (option) with internal vibrator alarm.
|
|
|
| GAS
PROBE IAQ INDOOR AIR QUALITY MONITOR |
Engineered for environments that require reliable,
multiparameter monitoring, the GasProbe
IAQ is HVAC's most versatile portable instrument.
• Simultaneous display of all four
parameters
(CO, CO2, RH and T0 "')
• Datalogging
available with infrared download . Audible, visual
and vibrating alarms
• Peak TWA and
STEL readings on demand . Simple automatic calibration
procedure
• Menu-driven
operation
|
|
| |
| GAS
ALERT MICRO..... MULTI GAS DETECTOR |
The NEW compact, feature-rich GasAlertMicro
multi-gas detector measures for H2S,
O2' CO, and LEL (models with
S02 also available).
Comes complete with:
• Sensors
• Built-in concussion
proof boot
• Internal vibrator
alarm for high noise areas
• Two AA alkaline
batteries . Metal alligator belt clip
• Calibration
cap and hose Features include:
• Compact size
weighs only 7.4 oz./211 g .
• Triple alarm
system
• 16-18 hour run
time on 2 alkaline AA batteries |
|
|
Designed for use with most BW single-gas and multi-gas
detectors, the Sampler is an ideal confined space
entry accessory. Simply attach it to your detector
and activate for continuous remote sampling.
• Compact and lightweight
6.2 oz. /175 g
•
Compatible with most BW single-gas and multi-gas detectors
• Low flow alarm,
battery alarm and system fault alarm with audible/
visual warnings
|
|
|
The MicroDock automated calibration,
test and record storage system is a cost-effective
way to manage calibration and bump testing of the
ultimate confined space gas detector - the GasAlertMicro.
• No computer required
• Fully
portable
•
Fully automatic bump tests and calibration
•
Expandable up to 10 modules
•
Stores and updates calibration records
•
Automatically tests audible and visual alarms
|
|
|
| GAS
ALERT MAX... Multi Gas Detector With Buit in
Pump |
The compact, rugged GasAlertMax comes
complete with:
• Four sensors
• Internal sampling
pump
• Black &
Decker 2-port charger and two VersaPakTM
batteries .
• 10 ft./3 m sampling
hose
BW Technologies has added new features
to the industry's most popular multi-gas detector.
User field options include Pass Code Protection,
Latching Alarms and Sensor Disable options. GasAlertMax,
the intelligent detector, is designed with cuttingedge
sensor, microcontroller and programming feature
technology. The larger LCD shows a simultaneous
real-time display of concentrations for H2S,
O2' CO and % LEL. Simple operation with
one button control, auto cal, auto zero and auto
full function self-test.
Available with Datalogging
|
|
|
| VALUE
ADDED CONFINED SPACE KITS FOR GAS ALERT MICRO
AND GAS ALERT MAX |
Standard Kit
Includes detector and standard accessories plus
everything for confined space entry, including calibration
gas.
|
|
| ››
Fixed & Standalone (Continuous) Detectors
/ Controllers |
| |
| GASPOINT-EXPLOSION-PROOF
TRANSMITTER |
The
GasPoint transmitter provides
continuous monitoring of toxic, oxygen or
combustible gased with cutting edge microcontroller
technology.
Smarter
• "Status-at-a-glance"
two large backlit
LCDs advise all gas hazard and environmental
conditions, as well as instrument and system
status
• Advanced sensor and transmitter
diagnostics
Simpler
• Reduced maintenance-no routine calibration
• Sensor remote 500+ feet
• Easy access to field terminations
Compatibility
• The GasPoint-4-20
mA signal output is compatible with all
4-20 mA control systems (DCS, PLC, etc.)
• MODBUS version available
• One transmitter does it all-interchangeable
sensors for combustibles (IR or Catalytic),
toxics (H2S, CO, S02' C12, NH3, HCN, N02)
and oxygen
• Onboard relays
|
|
|
| I.S.
PLANT RAT-INTRINSICALLY SAFE DESIGN |
The I.S. Plant Rat is engineered
to provide the ultimate in flexibility and
low maintenance.
• Available: H2S, CO, O2'
SO2' CI2, CI02,
NH3, HCN, N02, NO, HCI,
C2H60 and H2
•
Non-intrusive calibration
• Lower operating, maintenance and installation
costs .
• Transmitter accepts all sensors
• Remote sensor monitoring capabilities
• LCD display
• 2 wire 4-20 mA loop power |
|
|
The CD-420 Transmitter is shipped
factory tested and calibrated, ready for immediate
installation.
Advanced micropower electronic technology delivers
superior performance, eliminating false alarms
and providing a linear output for direct compatibility
to existing control systems.
• Reliable protection
• Accurate performance
• 2-wire 4-20 mA loop power
|
|
|
| PRJ
SERIES TRANSMITTER-SENSOR |
An industry first-maintenance free 4-20 mA
gas transmitter
• Rugged, durable, encapsulated transmitter
with sensor
• Eliminate maintenance: no calibration,
no sensor replacement required, no downtime
• Two year operational life
• Daily full function self-test (auto)
• Class I, Division 2 approved
|
|
|
| 4-20
MA CONTROLLERS CR-4000 |
BW 4-Channel, 4-20 mA
controllers have the built-in flexibility
for immediate needs and future requirements.
• Easy installation
• Simple operation
• SPDT relays included standard
• Local audible alarm included construction
• "Status-at-a-glance" alphanumeric
LCD f_ach channel
• Minimal cost of ownership
• Multi-functional external RESET. Can
be used to reset or cancel all latched alarms,
display peak (maximum) gas detected on each
channel and test all audible/visual alarms
• Slim profile
• Controllers accept any 4-20mA gas
transmitter
• Optional audible/visual alarm bar
|
|
| |
| 4-20
MA CONTROLLERS (PRJ-4000 STAINLESS STEEL
CONSTRUCTION) |
BW 4-Channel, 4-20
mA controllers have the built-in flexibility
for immediate needs and future requirements.
• Easy installation
• Simple operation
• SPDT relays included standard
• Local audible alarm included construction
• "Status-at-a-glance" alphanumeric
LCD f_ach channel
• Minimal cost of ownership
• Multi-functional external RESET. Can
be used to reset or cancel all latched alarms,
display peak (maximum) gas detected on each
channel and test all audible/visual alarms
• Slim profile
• Controllers accept any 4-20mA gas
transmitter
• Optional audible/visual alarm bar
|
|
|
| ALARM
RAT (SINGLE POINT AC OR DC GAS ALARM) |
FEATURES
The Alarm Rat is the COMPLETE Stand Alone
single point monitor and alarm system delievered
ready for use. Full flexibility is built-in
change the gas sensed or the measuring range
at any time.Equipped with four relays
to control and activate remote alarms
and other field interfaces.
• The Alarm Levels and Power Failure
ALarm
• Four 15 amp SPDT normally energized
relays
• 101 dB siren and LED alarms
• Modular engineered design provides
the ultimate in flexibility. In the field,
change the gas monitored and/or the measuring
range, add a sensor separation kit or duct
mount kit
• AC and DC compatible, 4-20 mA output
option
• Failsafe c\Calibration Reset
• Exterior hinged door for non-intrusive
calibration
• Lower operating, maintainance and
installation costs |
|
|
| NEW
RIG RAT III-THE STAND-ALONE SOLUTION |
Multi-Point
Wireless Gas Detection System
The stainless-steel
RIG RAT III is the world's only portable,
multi-point monitoring system. The Rig Rat
III has proven capabilities on mobile work
sites like drilling/service rigs and disaster
response teams. The fully selfcontained unit
continuously monitors for toxic gases, combustibles
and oxygen hazards.
•
Completely modular system with plug-in ports
for remote sensors and full line of external
alarms and options
• Real-time
digital data transmission for each sensor
• Intrinsically
safe, weatherproof, stainless-steel enclosure
• Total
system flexibility; add, change or reconfigure
system as required
• Continuous
two-way communication between controller and
remotely located detectors
• Cut installation
costs up to 75%, by eliminating the need for
cabling, wiring, conduit and trenching
• The RIG
RAT III detector has comprehensive
alarms and displays, with built-in alarm light,
loud audible alarm buzzer and status panel.
|
|
|
| NEW
RIG RAT III CONTROLLER |
• Real-time
readings for detectors and sensors
• Two-way
communication between
controller and all remotely located system
elements
• 2.4 GHz
digital, spread spectrum, license free, ISM
band RF transceiver with 1.8 mi.l 3 km transmission
radius
• Individual
alarm and LCD for each channel, with acknowledge/reset
button
• Stainless-steel
housing
• Built-in
audible (85 dB) and visual alarms
• Operate
controller via line power, or connect to external
emergency power supply
• Two plug-in
option ports for remote alarms, relays and
other accessories.
|
| |
|
|
