Our range of process engineering equipment includes AUTOMATIC SELF CLEANING STRAINERS which are designed for demanding applications where the flow of the fluids cannot be stopped to clean the filter / straining element. These strainers incorporate patent designs where after regular intervals, the straining element is cleaned and the debris removed. The flow of fluid is not stopped. There are two designs viz. the ELIMINATOR® series & the HYPERJET® series.

In the ELIMINATOR® series, the straining element is cleaned with the help of a rotating arm with a brush type of attachment. This is run using a geared motor. The actuator is set such that after regular intervals, the motor starts, the filter element is cleaned, and the debris is flushed out. The Eliminators®, automatic, self-cleaning strainers thus provide continuous debris removal from fluid piping systems that demand full time uninterrupted flow.

The Hyper-Jet® is an additional line of motorized, automatic self-cleaning strainers. It is very effective in systems applications where operating pressure is low or debris has difficult removal characteristics. FE 721 Series provides an addition of external backwash fluid that enhances the self-cleaning attribute over other automatic strainers. In other words, the same fluid is injected from an external source and sprayed on to the element using a set of spray nozzles (fixed on the rotating arm of the cleaning brush). This way, even sticky impurities can be effectively removed.